Date* Company*Point of Contact* First Last Email* Phone*FaxQuantity (For Customer Supplied Studs)1. STUD GEOMETRYDiameter:Bolt Length:Grip Length:Thread Length:Thread Designation:Bolt MaterialOther:Ult. Tensile Strength:Yield Strength:2. MEASUREMENT CAPACITYin lbs.3. HEIGHT RESTRICTIONInchesmm None 4. ELECTRICAL TERMINATION Connector Permanently Attached Cable Header Termination 5. ELECTRICAL SPECIFICATIONS1. Gage Installation Full Bridge Quarter Bridge 350 ohms 120 ohms 2. Max Operating Temperature 150° F 300° F (max.) 3. Special Options (available on a case-by-case basis)1. Temperature Compenstaion 150° F 300° F (max.) 2. Signal Trim to common full scale output 3. Outgassing Restrictions Additional CommentsPlease e-mail any sketches (if necessary) to the attention of Rob Turzanski. Please be sure to include your pertinent contact information and reference this questionnaire.PhoneThis field is for validation purposes and should be left unchanged. This iframe contains the logic required to handle Ajax powered Gravity Forms.
