Force Sensing Actuator Load Pins, SPHC Series
The SPHC Actuator Load Pins are unique force sensors utilizing the internal strain gage transducer process developed by Strainsert and used also in their Flat Load Cells® and Tension Links. These load pins and clevis bolts offer precision force measurement and monitoring by replacing existing clevis pins in hydraulic cylinder/actuator hardware.
Click Here for our Load Pin Quick Start Guide for help with setup and installation of our Load Pin products.
The Strain gages are sealed inside small axial holes within the load pin and are positioned at two locations at the hydraulic actuator interfaces. In order to sense only those strains which are induced by the shear forces at these two sections, the strain gages are positioned and oriented with great precision, at a neutral plane relative to one specific direction of pin loading.
The four strain gages (two at each location) are electrically connected to form a full bridge, the signal from each strain gage being additive so that the bridge output is proportional to the sum of the loads transmitted by the shear planes of the pin. The circuit typically includes temperature compensating, signal trim (optional) and balance resistors terminating in suitable connector socket or integral cable.
Standard models include detailed calibration data up to 500,000 lbs. Higher capacity calibration data is available at an additional charge. Strainsert factory calibrations are intended to simulate installed conditions, however, it is recommended that an in-place calibration be performed to account for any installation, tolerance, and/or alignment influences affecting sensor measurement.
Some Features Include:
Easy Installation: By replacing pins in hydraulic cylinders with minimum alterations using keeper plates.
Precison Load Sensing: Complete strain gage bridge circuit bonded and sealed inside small hole along longitudinal axis of pin, by exclusive Strainsert process.
Durability: Due to self protecting nature of strain gage installation sealed inside small holes.
Accuracy: Strainsert force sensing actuator clevis pins have combined error due to repeatibility and non-linearity of less then 1% of rated load typically.
The clevis pins are durable under severe conditions and working environments.These products have a wide range of applications, have a long operational life and are currently used on many installations where force measurement in a hydraulic actuator is required.
Strainsert - for superior internally gaged force transducers.
Strainsert stands for:
- Product Quality
- Knowledgeable Technical Staff
- Standard and Custom Designs
- Customer Service
- Comprehensive Testing
For information on load pins, force sensing bolts, load cells, tension links or our high quality custom products, Contact Us for further assistance.