Standard Force Transducer Product Accessories
Strainsert is pleased to provide products that range anywhere from
the individual sensor itself all the way to complete turn-key systems.
This allows the user to design his measurement system to meet his specific
needs or they can purchase a complete functioning, tested and calibrated
system, ready for immediate use with minimal set-up required. Typical turn-key solutions
include the transducers, cabling, and read-out or signal conditioning instrumentation
as appropriate.
The variety of force transducers and instrumentation systems are detailed in the product section.
This section describes the part numbers and technical data for cables, connectors, and shunt
calibration resistors, and are listed in the specification pop-ups below.
Standard Cable Assemblies
Strainsert's standard cable assemblies come in common usge lengths of ten, twenty five, fifty and one hundred
feet or can be made to fit particular customer specifications. See the below specification for more detailed
information.
Please see our load pin and our load cell product lines
for specific detail on those product accessories.
 Cable and Accessories
Online Catalog |
|
 Standard Cable Assembly Specification Table and Order Information |
Standard Cable Technical Data Table |
Transducer, Receptacles and Mating Connectors
Strainsert's transducer mating connectors come in various configurations including four, six and eight pin
connectors with strain relief.
Transducer Receptacles
Online Catalog |
|
| Transducer Mating Connectors Specification Table |
Transducer Receptacles and Mating Connectors Technical Data Table |
Standard Shunt Calibration Resistors
Shunt calibration resistors are used to simulate a resistance change from an applied load,
to assist in instrument set-up, or to test the transducer/instrument integrity. See the below specifications table for further detail.
Also See the Strainsert calibration page for
further details on our calibration service.
Standard Shunt Calibration Resistor
Online Catalog |
| Standard Shunt Calibration Resistors Specifications Table |
|
Strainsert - for superior internally gaged force transducers.
Strainsert stands for:
- Product Quality
- Knowledgeable Technical Staff
- Standard and Custom Designs
- Customer Service
- Comprehensive Testing
Contact Strainsert
For information on load pins, force sensing bolts, load cells, tension links or our high quality custom products, Contact Us for further assistance.
|
|
)
)
)
)
)
